Splint or Slabs
ExpProductImageSplint or Slabs
ExpProductImageSplint or Slabs
ExpProductImageSplint or Slabs

FlexiOH®

FlexiOH® Splint or Slabs

Absolute washable orthopedic Immobilizer for immobilization in the pre-operative, post-operative and rehabilitation period.

Ready to discuss your health needs?

Schedule A meeting
Description
Measurement
Video

Absolute washable orthopedic Immobilizer for immobilization in the pre-operative, post-operative and rehabilitation period.

INTENDED USE

  • Acute swelling of fractured / injured limb / joint
  • Pre-operative stabilization
  • Post-operative support after surgery
  • Ligament sprain / soft tissue injury
  • Support during rehabilitation
FlexiOH® Splints / Slabs are designed for immobilization in the pre-operative, post-operative, acute swelling and rehabilitation period. FlexiOH® has an built-in soft hook and loop fastener that secures the splint over the limb which is very comfortable for skin contact. With unique FlexiOH® technology, this splint gives better patient comfort along with breathability and washability. For application of FlexiOH® Splint / Slab, healthcare professional need to apply it on the patient’s limb with the soft hook and loop fastener and then cure it with the Rizycure® light device (recommended) for 3-10 minutes depending on the size of splint/ slab. Once it is rigid, it will provide support during rehabilitation. With valcro, the splint can be removed / adjusted anytime for dressing and rehabilitation.
 
 
FlexiOH® Splint or Slab Immobilizer provide ~30 % open area of skin to breathe, wash, and exposure to sunlight which all are necessary to maintain healthy skin.

Application Process

FlexiOH® Splint or Slabs Immobilizer application process is as follows

OrthoHeal

Step – 1 : Choose the appropriate size from given chart

OrthoHeal

Step – 2 : Take the suitable size for the application

OrthoHeal

Step – 3 : Apply the splint by passing the hand in between the loop and splint

OrthoHeal

Step – 4 : Check the position of the loops is comfortable to the patient

OrthoHeal

Step – 5 : Start tightening the first loop at the palm circumference

OrthoHeal

Step – 6 : Tighten the last loop at the end

OrthoHeal

Step – 7 : Tighten all in between loops to fit the splint perfectly before curing

OrthoHeal

Step – 8 : Take a RizyCure curing light device

OrthoHeal

Step – 9 : Start exposing the splint / slab with RizyCure curing light device

OrthoHeal

Step – 10 : Re-tighten all the loops once the splint /slab is rigid

OrthoHeal

Step – 11 : Cut the extra length of loops with scissors